<%@LANGUAGE="JAVASCRIPT" CODEPAGE="65001"%> Mainline Conveyor Systems, Inc. CRC Specifications
TVA
MBC
CRA
CBS
FTEP
LDC
LDRNL
TDB
TVP
SDG
LDL
TDC
TDI
LDR
LDS
SID
FTEM
FTE
TVM
TVT
TVB
TDR

Chain Roller Conveyor (CRC)

Description
  
Specifications
crc
General Specifications
Nominal Conveyor Width
24" through 84" (bf) (6" increments)
Conveyor Length
2'-0" - 10'-0" (3" increments)
Height
12" TOR standard; 6" TOR (with alternate configuration)
Drive Capacity
4,000 lbs.
Conveyor Speed
40, 60 FPM
Power Requirements
Electrical Supply; Amperage
230-460V/3ph/60hz; 1.95 Amps(460V) @ full load
Drive Gearmotor

1 HP @ 40 or 60 FPM
Construction

Frame

 Standard integral weldment (lift out rollers), includes:
  • Sideframe: C5x6.7# structural steel channel
  • Shaft supports: Formed Flat, 3/16" thick x 2-7/8" width w/Laser cut support slots
  • Tie braces (cross supports): 4 x 2 x 1/8" rectangular tubing at max 4'-0" centers.
  • Legs: Formed Flat, 3/16" thick x 6-1/4" width, 2 per tie brace
Rollers Standard lift-out style roller mounted in frame on 3" centers includes:
  • Tube: 2.5" diameter x 11 gauge steel (Galvanized also available)
  • Shaft: 5/8" hex retained in roller
  • Bearings: Comercial grade, grease-packed, sealed-for-life
  • Sprockets: 2 - 10 tooth #40, 1/2" pitch
Control Options
Manual Operation
Pushbutton operator-actuated
Automatic Operation
Combines with load detecting sensors and control logic to position and advance loads.
PC Controls
Pushbutton controls are included with automatic controls as application dictates.