<%@LANGUAGE="JAVASCRIPT" CODEPAGE="65001"%> Mainline Conveyor Systems, Inc. LDL Specifications
TVA
MBC
CRA
CBS
FTEP
LDC
LDRNL
TDB
TVP
SDG
LDL
TDC
TDI
LDR
LDS
SID
FTEM
FTE
TVM
TVT
TVB
TDR

Load Lifting Device (LDL)
Description
  
Specifications
Nominal Conveyor Width 60" through 84" BF
Max Conveyor Length 20'0" (other lengths upon request)
Height 12" TOR
Load Capacity 3,000 lbs at 45 fpm
Conveyor / Transfer Speed 45, 60 fpm (other speeds upon request)
Power Requirements
Electrical Supply
230-460V/3ph/60hz

HP / Amperage

  • Conveyor
  • Transfer
  • Lift
  • 1 Hp / 1.85 amps at 460 V
  • 3/4 Hp / 1.45 amps at 460 V
  • 5 Hp / 6.8 amps at 460 V
Construction

Typical Conveyor and Transfer Features

 Reference standard conveyor (CRA) and Transfer (TDC) data sheets
Lift Device

Lift Tables (2):

  • 4000 lbs gross capacity each table
  • 48" available vertical travel
  • 24" x 64" base and platform
  • velocity fuses on cylinders

Pump Package

  • 5 Hp, 460 V/60Hz/3Ph pump motor
  • 11 gal capacity tank
  • 110 V solenoid and controls
  • Special synchronizing valve to control level conveyor motion
Control Options
Manual Operation Pushbutton operator-actuated
Automatic Operation Load detection sensors combine with control logic to actuate the conveyor to move and position loads.

Area / Zone Controls

PC Controls

 Air actuators are controlled by PC logic to engage drive or brakes in individual areas or zones to combine, separate, or move loads along the conveyor.