Load Rotating Device (LDR) |
||
Specifications |
||
| Nominal Conveyor Width | 72" and 84" available |
|
| Nominal Length, Module | 7' and 8' |
|
| Self Contained | 9' and 10' |
|
| Nominal Ring O.D. | 71" and 83" |
|
| Minimum Height | 12" T.O.R. |
|
| Load Capacity | 2,500 lbs.* |
|
| Rotation Speed | 60 FPM |
|
| Conveyor Speed | 40, 60FPM (other speeds upon request) |
|
Power Requirements |
||
Air Supply, Lift |
16 CFM @ 90 PSIG to raise in 1sec. |
|
Electrical Supply; Amperage (2 spd) |
230-460V/3ph/60hz; 1.23 Amps (460V) @ full load |
|
(VFD) |
230-460V/3ph/60hz; 1.85 Amps (460V) @ full load | |
Rotate Gearmotor (2 spd) |
.8/.2 HP @ 60 FPM rim speed | |
(VFD) |
1 HP @ 60FPM rim speed | |
Conveyor Drive Gearmotor |
1 HP @ 40 or 60 FPM | |
Construction |
||
| Base Frame | Structural steel frame supports integral conveyor and guides lift |
|
| Lift Frame | Structural frame mounted on 6 actuators, supports ring weldment and rotation means |
|
| Lift Leveling | Chain and sprocket assembly equilizes vertical motion at 4 locations |
|
| Lift Ring and Support | Structural steel weldment supported on 8 precision ball bearings and guided by
multiple cam rollers |
|
| Rotate Drive | Gearmotor adjustably mounted to lift frame pulls ring by circumferential drive chain |
|
| Integral Conveyor | Standard Mainline belt powered conveyor; with or without drive |
|
Control Options |
||
| Manual Operation | Pushbutton operator-actuated |
|
| Automatic Operation | Device position sensors combine with Load detecting sensors and control logic to
position, and rotate a unitized load. |
|
PC Controls |
Manual controls are included with automatic controls. | |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |