Load Rotating Device - Mesh Belt (LDRMB) |
||
Specifications |
||
| Nominal Conveyor Width | 60" to 96" available |
|
| Nominal Length, Module | 8' to 13' |
|
| Minimum Height | 12" TOR |
|
| Load Capacity | 3,000 lbs* |
|
| Conveyor Speed | 45, 60 fpm |
|
Power Requirements |
||
Air Supply, Pivot |
Approximately 0.3 CFM at 40 psig |
|
Electrical Supply; Amperage |
230-460V/3ph/60hz; 1.85 Amps (460V) @ full load |
|
Drive Gearmotors (2) |
1 Hp at 45 or 60 fpm | |
| Drive Chains | 3/4" Pitch #60 | |
Construction |
||
| Frame | Integral weldment includes
|
|
| Mesh Belt | Polypropylene or Acetal textured flat top link belt with 1"P modular links |
|
| Belt Support Bed | Melamine laminated particle board panels, 3/4" thick, mechanically fastened to frame |
|
| Drive Shaft |
2-1/2" sq shaft with 15T x 1"P sprockets mounted at approximate 5" centers across conveyor width |
|
| Wrap & Terminal Rollers | Retained (2.5"Dia - 11g galvanized, 5/8 hex shaft, 6205 precision bearings) | |
| Pivot Assembly | Pivot Plate: Approx. 5.5" dia textured surface Post and Bearings: Approx. 1" dia TGP w/mounted bearings Lift Actuator: Large dia, short stroke, double acting Rotation Sensor: Shaft Encoder |
|
Control Options |
||
| Manual Operation | Pushbutton operator-actuated |
|
| Automatic Operation | Device position sensors combine with Load detecting sensors and control logic to
position, and rotate a unitized load. |
|
PC Controls |
Manual controls are included with automatic controls. | |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |