Sheet Inserting Device (SID) |
||
Specifications |
||
| Nominal Conveyor Width | 48" through 96" BF | |
| Conveyor Length | 9'-0" (other lengths upon request) | |
| Height | 12" TOR | |
| Load Capacity | 4,000 lbs | |
| Conveyor Speed | 45, 60 fpm (other speeds upon request) | |
Power Requirements |
||
Electrical Supply; Amperage |
230-460V/3ph/60hz; 1.53 Amps(460V) @ Full load |
|
Drive Gearmotor |
3/4 Hp at 45 or 60 fpm |
|
Construction |
||
| Frame | Standard integral weldment includes; sideframe: FL6 formed angle (C5x6.7# structural channel also available); Shaft supports: formed flat, 3/16" thick x 2-7/8" width w/laser cut support slots; Tie Braces: 4x2x1/8 rectangular tubing at max 4'-0" centers; Legs: formed flat, 3/16" thick | |
| Rollers | Standard lift-out style chain rollers mounted in frame on 3" center includes: Tube - 2.5" diameter x 11 gauge steel (flow coat galvanized); Shaft - 5/8" cold rolled hex retained in roller; Bearings - Precision and commercial grade, grease packed , sealed for life; Sprockets - two 10 tooth #40, 1/2" pitch per roller | |
| Drive | Flange mounted helical gearmotor concealed beneath the rollers and accessible from the conveyor side | |
Control Options |
||
| Manual Operation | Pushbutton operator-actuated conveyor drive, manual single sheet insertion per load | |
| Automatic Operation / PC Controls | Combines with load detecting sensors and control logic to advance loads to a position just upstream of the sheet slot | |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |