Belt Transfer Device (TDB) |
||
Specifications |
||
| Nominal Conveyor Width | 72", 84", 96" (BF) | |
| Nominal Device Length | 4', 5', 6', 7' | |
| Minimum Height | 12" TOR | |
| Load Capacity | 2,500 lbs per device at 45 fpm and 80 psig air supply | |
| Carrier Chains | 2-1/2"W x 3/4" pitch, flat top plastic (acetal) chain | |
| Chain Spacing | Chains spaced at 9", 12", or 15" nominal center to center | |
Power Requirements |
||
| Air Supply | 6 CFM and 90 psig, to raise in 1 sec |
|
| Electrical Supply; Amperage | 230-460V/3ph/60hz; 1.85 Amps(460V) @ Full load |
|
| Drive | 1 Hp at 45 fpm | |
Construction |
||
| Frame | Structural chain support bars welded and bolted in truss type construction; individually mounted to lateral frame members | |
| Drive Train | The drive shaft is driven by a gear motor via a separate drive chain. All carrier chains are driven from drive shaft | |
| Lift and Support | 4 or 6 individual flexible air actuators | |
Control Options |
||
| Manual Operation | Pushbutton operator-actuated | |
| Automatic Operation / PC Controls | Device position sensors combine with load detecting sensors and cotrol logic to position and transfer loads. Pushbutton controls are included, and reversing controls are available | |
| Safety Controls / Priority Entry Controls | Collision avoidance controls operate automatically to control the intersection. When selected by operator, loads are held upstream of intersection to allow load entry. | |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |