Chain Transfer Device (TDC) |
||
Specifications |
||
| Nominal Conveyor Width | 60", 72", 84", 96" (bf) | |
| Nominal Device Length | 4', 5', 6', 7' | |
| Minimum Height | 12" TOR | |
| Load Capacity | 2,500 lbs., per device @ 40FPM & 80 PSIG air supply | |
| Carrier Chains | #60 (3/4" pitch) roller chain | |
| Chain Spacing | Chains spaced at 9", 12", or 15" nominal center to center | |
Power Requirements |
||
| Air Supply | 6 CFM @ 90 PSIG, to raise in 1 sec |
|
| Electrical Supply; Amperage | 230-460V/3ph/60hz; 1.53 Amps(460V) @ Full load |
|
| Drive | 3/4 HP @ 40 or 60 FPM | |
Construction |
||
| Frame | Structural chain support bars welded and bolted in truss type construction; individually mounted to lateral frame members. | |
| Drive Train | Primary drive chain drives drive shaft and is direct driven by gearmotor. Additional carrier chains driven from drive shaft. | |
| Lift and Support | 4 or 6 individual flexible air actuators | |
Control Options |
||
| Manual Operation | Pushbutton operator-actuated | |
| Automatic Operation / PC Controls | Device position sensors combine with load detecting sensors and cotrol logic to position and transfer loads. Pushbutton controls are included, and reversing controls are available | |
| Safety Controls / Priority Entry Controls | Collision avoidance controls operate automatically to control the intersection. When selected by operator, loads are held upstream of intersection to allow load entry. | |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |